 |
Manufacture & supplier exporter of industrial valves:
It Gives Us Immense Pleasure To Introduce Our Company As One Of The Dynamic Growth Oriented And Quality Conscious Engineering Firm.
The Organization Is Managed By Technocrats, Having Wide 10 Years Of Rich Experience In Projects, Maintenance, And Production & Marketing Of Industrial Valves For The Leading Valve Manufacturing Companies Based At Ahmedabad.
Company’s Product Mix Includes Pressure Gauge,Snuubers, Gauge Cock Gate, Globe, Check, Butterfly, Ball Valves Diaphragm Valve &, Needle Valves ,Shyphon ( Q Type, U Type, O Type) And Pipe Fitting, These Valves Find Application In Hydraulic / Agriculture, Chemical / Process Industries, Water Treatment Plants, Sugar & Distillery Plants, Refineries / Petrochemical Plants, Pulp & Paper Mills, Power Plants, Steel / Engineering Industries, Textile Process, Pharmaceuticals Industries And Boiler Installations.
These Valves Are Generally Conforming To Api, Bs, Ansi, Asme And Din International Technical Standards For Design, Manufacture And Testing.
As A Special Development Company Has Developed High Pressure Ball Valves And Needle Valves Up To 10000 Psig Pressure.
The Management Of The Company Has Adopted Total Quality Management As Its Organizational Goal And The Quality Policy Is To Satisfy Our Valued Customer With Excellent Quality Products And Prompt Services At Competitive Prices. Brief
|
Procurment Of Raw Material:
In The Manufacturing Process We Require Castings Of Different Grades, Stainless Steel Bars, Forgings, Hardware, Gaskets & Paints. All Raw Material Purchase From The Reputed & Genuine Concerned Supplier.
Quality Control:
All Raw Materials Are Checked By Our Quality Assurance Department Prior To Manufacturing Process. For An Example, When We Received The Castings, It Is Checked Visually And Dimensionally For Machining Tolerance. We Also Check The Foundry Chemical Test Certificate And Physical Test Certificate, Compared To Suitable International Standard And Passed To Machining Shop For The Further Process, If It Is Rejected It Is Send Back To The Supplier.
Machining:
The Raw Material Issued To The Machine Shop For The Machining, Is Machined Strictly As Per The Relevant Drawings.
Inprocess Testing:
If It Is Found O K Dimensionally The Valve Body And Bonnet Are Sent For The Hydro Testing. All Internal Parts Such As Seat, Disc, Stem Are Measured By The Vernier Caliper Or Micrometer, If It Is Found O K Than Pass To Assembly Section For The Further Assembly. All The Valve Body And Bonnet Are Tested On The Motorized Pump Or Hand Pump As Per The Relevant Standard. The Theory Being, When The Body Or The Bonnet Is Under Pressure There Should Not Be Any Leakage Or Drops Of The Testing Fluid From Any Portion Of The Castings. If Any Leakage Observed, It Is Rejected And Sent Back To The Foundries.
Assembly:
The Body And Bonnet, Which Are Hydrostatically O K, Are Sent To Assembly Section, Duly Handled With Care To Avoid The Scratches On The Machined Surfaces. In The Assembly Section Body And Bonnet Are Drilled On Drill Machine With The Help Of Jigs & Fixtures For Uniformity And Interchangeability.
Testing:
After Assembly Of New Complete Valve Is Sent For Hydrostatic Testing. If No Leakage Is Found As Per The Relevant Standard, It Is Sent To Finishing Section
|
|
|
|
| |
| Automatic Pneumatic Valve |
| Resilient Seated Butterfly Valves |
| 3 Way Diverting Valve |
| Bleed Valve |
| Precision Valves |
| Concussion Relief Valve |
| Fluid Control Valves |
| Manual Reset Solenoid Valve |
| Brass Boiler Valve |
| Valve Body Cover |
| Cast Globe Valve |
| Diaphragm Control Valve |
| Full Port Ball Valve |
| Dumping Valve |
| Miniature Check Valves |
| Pressure Release Valve |
| Motorized Ball Valve |
| Pneumatic Check Valve |
| Rotary Control Valve |
| Locking Ball Valves |
| Sanitary Valve |
| Soft Seated Ball Valve |
| Piston Actuated Valves |
| Digital Control Valves |
| Hydraulic Directional Valve |
|
|
|
